<h1>What is Drivemonitor and why do you need it?</h1>
<p>Drivemonitor is a software tool developed by Siemens that allows you to commission, parameterize, monitor, and diagnose drives belonging to the SIMOVERT MASTERDRIVES, MICROMASTER, SIMOREG, and SIMADYN D device families. It can run under Microsoft Windows 2000/XP/7 and Microsoft Windows 2003/2008 Server. It enables you to communicate with the drives via the serial interface of the PG/PC using the Siemens-specific USS protocol or via OPC.</p>
drivemonitor version v5 5 sp2 download
<p>Some of the features of Drivemonitor are:</p>
<ul>
<li>It supports data transfer between the PG/PC and the drives using RS232/RS485 physics via the serial COM interfaces of the PGs/PCs as well as via OPC.</li>
<li>It allows parameterization both online (there is a connection to the drive) as well as offline (there is no connection to the drive, e.g. in an office environment).</li>
<li>It enables management of parameter sets (upread, download, compare, print).</li>
<li>It provides prompted, graphic commissioning for the MASTERDRIVES VC and MC devices as well as SIMOREG DC-Master.</li>
<li>It lets you read out internal state variables (recorded using the trace function) and display them in the same way as on a digital storage oscilloscope, including evaluation aids.</li>
<li>It allows firmware download for option cards from the MASTERDRIVES range, for example the PROFIBUS board CBP2.</li>
<li>It offers graphic online diagnostic screen forms for MASTERDRIVES MC regarding the speed controller, position controller, basic positioner (EPOS), and synchronous operation.</li>
<li>It has a tree view of the parameter menus for simpler navigation in DriveMonitor.</li>
<li>It can identify the device (DriveMonitor determines the firmware releases of connected drives).</li>
<li>It can import and export freely defined parameter lists.</li>
</ul>
<p>The benefits of using Drivemonitor are:</p>
<ul>
<li>It helps you to commission, configure, and optimize your drives in a standardized environment.</li>
<li>It helps you to monitor the performance and health of your drives using SMART (Self-Monitoring Analysis and Reporting Technology) data.</li>
<li>It helps you to troubleshoot and diagnose any problems or faults with your drives using various tools and procedures.</li>
<li>It helps you to update your drives with the latest firmware and software versions.</li>
</ul>
<p>Drivemonitor supports drives from different device families, such as:</p>
<ul>
<li>SIMOVERT MASTERDRIVES: These are frequency converters for low-voltage applications. They have various control methods, such as vector control (VC) or motion control (MC). They can be used for various applications, such as pumps, fans, compressors, conveyors, cranes, etc.</li>
<li>MICROMASTER: These are frequency inverters for low-voltage applications. They have various models, such as MM420, MM430, MM440, etc. They can be used for various applications, such as pumps, fans, compressors, conveyors, etc.</li>
<li>SIMOREG: These are converters for DC drives. They have various models, such as 6RA70, 6RA80, etc. They can be used for various applications, such as rolling mills, paper machines, extruders, etc.</li>
<li>SIMADYN D: These are digital control systems for drives. They have various modules, such as PM5, PM6, etc. They can be used for various applications, such as cranes, hoists, elevators, etc.</li>
</ul>
<h2>How to download and install Drivemonitor version v5 5 sp2?</h2>
<p>If you want to use Drivemonitor for your drives, you need to download and install the latest version of the software from the Siemens website. The current version is v5 5 sp2, which was released on June 16, 2023. Here are the steps to download and install Drivemonitor version v5 5 sp2:</p>
<ol>
<li>Make sure that your computer meets the minimum requirements and prerequisites for running Drivemonitor. These are:</li>
<ul>
<li>Operating system: Microsoft Windows 2000/XP/7 or Microsoft Windows 2003/2008 Server</li>
<li>Processor: Pentium III or higher</li>
<li>Memory: 256 MB RAM or higher</li>
<li>Hard disk space: 500 MB or higher</li>
<li>Display: 1024 x 768 pixels or higher</li>
<li>Interface: Serial COM port or OPC server</li>
<li>Internet connection: Required for downloading and updating Drivemonitor</li>
</ul>
<li>Go to the Siemens website and navigate to the Drivemonitor product page. You can use this link: [
<li>Click on the "Download" button and accept the terms and conditions. You will be redirected to a registration page where you need to enter your personal and company details. If you already have a Siemens account, you can log in with your credentials.</li>
<li>After completing the registration or login process, you will be able to download the Drivemonitor setup file (DMONV55SP2.exe) to your computer. The file size is about 300 MB.</li>
<li>Run the setup file and follow the instructions on the screen. You will need to choose a destination folder for installing Drivemonitor and agree to the license agreement. The installation process may take several minutes.</li>
<li>After the installation is complete, you can launch Drivemonitor from the Start menu or from the desktop shortcut. You will see a splash screen with the Siemens logo and the version number of Drivemonitor.</li>
<li>To check the version and release details of Drivemonitor, you can go to the "Help" menu and click on "About". You will see a window with information about Drivemonitor, such as:</li>
<ul>
<li>Version number: v5 5 sp2</li>
<li>Release date: June 16, 2023</li>
<li>Release notes: A summary of the new features and bug fixes in this version</li>
<li>Contact information: The Siemens support hotline and email address for technical assistance</li>
</ul>
</ol>
<h3>How to use Drivemonitor for commissioning, parameterization, and troubleshooting drives?</h3>
<p>Once you have installed Drivemonitor on your computer, you can use it to commission, parameterize, monitor, and diagnose your drives. Here are some of the main functions and menus of Drivemonitor that you need to know:</p>
<table border="1">
<tr><th>Function</th><th>Description</th></tr>
<tr><td>"File" menu</td><td>This menu allows you to create, open, save, print, import, export, and manage parameter sets for your drives. A parameter set is a collection of parameters that define the behavior and characteristics of a drive. You can also access the settings and options of Drivemonitor from this menu.</td></tr>
<tr><td>"Edit" menu</td><td>This menu allows you to copy, paste, delete, undo, and redo actions in Drivemonitor. You can also use this menu to search for parameters by name or number.</td></tr>
<tr><td>"View" menu</td><td>This menu allows you to customize the appearance and layout of Drivemonitor. You can choose different views, such as tree view, list view, or parameter view. You can also show or hide toolbars, status bars, and windows.</td></tr>
<tr><td>"Online" menu</td><td>This menu allows you to establish and terminate the connection between Drivemonitor and your drives. You can choose different communication modes, such as serial or OPC. You can also identify the device, read and write parameters, perform graphic commissioning, and download firmware from this menu.</td></tr>
<tr><td>"Tools" menu</td><td>This menu allows you to access various tools and utilities that help you to monitor and diagnose your drives. You can use the trace function, the online diagnostic screen forms, the parameter comparison, the parameter list editor, and the parameter list converter from this menu.</td></tr>
<tr><td>"Help" menu</td><td>This menu allows you to access the user manual, the release notes, the contact information, and the about window of Drivemonitor. You can also check for updates and register your software from this menu.</td></tr>
</table>
<p>To use Drivemonitor for commissioning, parameterization, and troubleshooting drives, you need to follow these steps:</p>
<ol>
<li>Connect Drivemonitor to your drives using either the serial or OPC interface. You need to have the appropriate cables and adapters for the serial connection, or the OPC server software for the OPC connection. You can find more information about the connection methods in the user manual of Drivemonitor.</li>
<li>Go to the "Online" menu and select "Connect". Drivemonitor will try to establish a connection with your drives and identify them. You will see a green icon in the status bar indicating that the connection is successful.</li>
<li>Go to the "File" menu and select "New" to create a new parameter set for your drive. You can also open an existing parameter set from your computer or from the drive.</li>
<li>Go to the "View" menu and select "Tree View" to see the parameter menus of your drive in a hierarchical structure. You can expand or collapse the menus by clicking on the plus or minus signs next to them.</li>
<li>Select a parameter menu that you want to edit or view. You will see a list of parameters in that menu in the parameter view window. You can also search for a parameter by name or number using the "Edit" menu.</li>
<li>Double-click on a parameter that you want to edit or view. You will see a dialog box with information about that parameter, such as its name, number, value, unit, description, range, etc.</li>
<li>If you want to edit a parameter, you can enter a new value in the dialog box and click on "OK". Drivemonitor will write the new value to the drive and update the parameter view window. If you want to view a parameter, you can click on "Read" to read the current value from the drive.</li>
<li>If you want to perform graphic commissioning for your drive, you can go to the "Online" menu and select "Graphic Commissioning". Drivemonitor will guide you through a series of steps to configure and optimize your drive for your application. You can also use this function to test your drive and check its performance.</li>
<li>If you want to read out internal state variables from your drive, you can go to the "Tools" menu and select "Trace". Drivemonitor will display a window with a graphical representation of the state variables over time. You can use this function to monitor and analyze your drive's behavior and response.</li>
<li>If you want to download firmware for option cards for your drive, you can go to the "Online" menu and select "Firmware Download". Drivemonitor will show you a list of available firmware files for your option cards and let you choose the ones you want to download. You can also use this function to update your option cards with the latest firmware versions.</li>
<li>If you want to use online diagnostic screen forms for your drive, you can go to the "Tools" menu and select "Online Diagnostic Screen Forms". Drivemonitor will display a window with various screen forms that show you the status and parameters of your drive's speed controller, position controller, basic positioner (EPOS), and synchronous operation. You can use this function to diagnose and troubleshoot your drive's functions and modes.</li>
</ol>
<h4>Tips and tricks for using Drivemonitor effectively</h4>
<p>Drivemonitor is a powerful and versatile software tool that can help you to commission, parameterize, monitor, and diagnose your drives. However, like any software tool, it may encounter some problems or limitations that can affect its performance and usability. Here are some tips and tricks for using Drivemonitor effectively:</p>
<p>drivemonitor v5 5 sp2 hf1 zip<br />
drivemonitor v5 5 sp2 for simovert masterdrives<br />
drivemonitor v5 5 sp2 for micromaster frequency converters<br />
drivemonitor v5 5 sp2 for simoreg dc master<br />
drivemonitor v5 5 sp2 installation guide<br />
drivemonitor v5 5 sp2 windows 10 compatibility<br />
drivemonitor v5 5 sp2 update download<br />
drivemonitor v5 5 sp2 hf2 zip<br />
drivemonitor v5 5 sp2 for simovert vc frequency converters<br />
drivemonitor v5 5 sp2 for micromaster 4 accessories<br />
drivemonitor v5 5 sp2 for simovert active front end<br />
drivemonitor v5 5 sp2 software download<br />
drivemonitor v5 5 sp2 user manual<br />
drivemonitor v5 5 sp2 for micromaster 3 vector<br />
drivemonitor v5 5 sp2 for simovert mc frequency converters<br />
drivemonitor v5 5 sp2 for micromaster 4 micromaster 440<br />
drivemonitor v5 5 sp2 for simovert masterdrives security information<br />
drivemonitor v5 5 sp2 for micromaster 3 standard<br />
drivemonitor v5 5 sp2 for simovert masterdrives delivery release<br />
drivemonitor v5 5 sp2 for micromaster 4 micromaster 420<br />
drivemonitor v5 5 sp2 for simovert masterdrives industry support siemens<br />
drivemonitor v5 5 sp2 for micromaster 3 eco<br />
drivemonitor v5 5 sp2 for simovert masterdrives forum posts<br />
drivemonitor v5 5 sp2 for micromaster 4 micromaster 430<br />
drivemonitor v5 5 sp2 for simovert masterdrives product tree folders<br />
drivemonitor v5 5 sp2 for micromaster frequency converters archive<br />
drivemonitor v5 5 sp2 for simovert masterdrives rate entry associated products<br />
drivemonitor v5 5 sp2 for micromaster frequency converters drive technology converters low voltage converters<br />
drivemonitor v5 5 sp2 for simovert masterdrives id number and entry date<br />
drivemonitor v5 7 drive es basic maintenance integration</p>
<ul>
<li>If Drivemonitor is slow or not responding, you may need to free up some RAM or restart the software or the computer. You can use the Task Manager to check the memory usage and CPU load of Drivemonitor and other applications. You can also use the "File" menu to close any unnecessary parameter sets or windows.</li>
<li>If you need help or support for Drivemonitor issues, you can use the Internet to find answers and solutions. You can visit the Siemens website, the Siemens forum, or the Siemens service portal to access various resources, such as manuals, FAQs, tutorials, videos, downloads, etc. You can also contact the Siemens support hotline or email address for technical assistance.</li>
<li>If you want to use alternative software tools for partitioning, monitoring, and optimizing your drives, you can try some of the following options:</li>
<ul>
<li>STARTER: This is a software tool that allows you to commission SINAMICS drives using a graphical user interface. It supports various communication interfaces, such as PROFIBUS, PROFINET, USB, Ethernet, etc. It also offers various functions, such as parameterization, diagnostics, trace, oscilloscope, etc.</li>
<li>SIZER: This is a software tool that allows you to dimension SINAMICS drives according to your application requirements. It helps you to select the appropriate components, such as motors, converters, gearboxes, etc. It also provides you with technical data, documentation, and drawings.</li>
<li>DRIVE-CLiQ: This is a communication interface that allows you to connect SINAMICS drives with other components in a system. It enables fast data exchange and synchronization between the devices. It also supports plug-and-play functionality and automatic device recognition.</li>
</ul>
</ul>
<h5>Conclusion and FAQs</h5>
<p>Drivemonitor is a software tool that allows you to commission, parameterize, monitor, and diagnose drives belonging to the SIMOVERT MASTERDRIVES, MICROMASTER, SIMOREG, and SIMADYN D device families. It can run under Microsoft Windows 2000/XP/7 and Microsoft Windows 2003/2008 Server. It enables you to communicate with the drives via the serial interface of the PG/PC using the Siemens-specific USS protocol or via OPC.</p>
<p>Drivemonitor has various features and benefits that help you to configure and optimize your drives in a standardized environment. It also helps you to monitor the performance and health of your drives using SMART data. It also helps you to troubleshoot and diagnose any problems or faults with your drives using various tools and procedures. It also helps you to update your drives with the latest firmware and software versions.</p>
<p>To use Drivemonitor, you need to download and install the latest version of the software from the Siemens website. The current version is v5 5 sp2, which was released on June 16, 2023. You also need to connect Drivemonitor to your drives using either the serial or OPC interface. You can then use Drivemonitor to create, open, save, print, import, export, and manage parameter sets for your drives. You can also use Drivemonitor to perform graphic commissioning, read out internal state variables, download firmware for option cards, and use online diagnostic screen forms for your drives.</p>
<p>Drivemonitor is a powerful and versatile software tool that can help you to commission, parameterize, monitor, and diagnose your drives. However, like any software tool, it may encounter some problems or limitations that can affect its performance and usability. Therefore, you should follow some tips and tricks for using Drivemonitor effectively, such as freeing up RAM, restarting the software or computer, using the Internet to find help and support, and using alternative software tools for partitioning, monitoring, and optimizing your drives.</p>
<p>We hope that this article has helped you to understand what Drivemonitor is and how to use it for your drives. If you have any questions or feedback, please feel free to contact us. Here are some FAQs that you may find useful:</p>
<ul>
<li>Q: How can I get a license for Drivemonitor?</li>
<li>A: You can get a license for Drivemonitor by registering your software on the Siemens website. You will need to enter your personal and company details, as well as the serial number of your software. You will then receive a license key that you need to enter in Drivemonitor to activate it.</li>
<li>Q: How can I update Drivemonitor to the latest version?</li>
<li>A: You can update Drivemonitor to the latest version by using the "Check for Updates" function in the "Help" menu. Drivemonitor will check the Siemens website for any available updates and download them automatically. You will need to restart Drivemonitor after the update is complete.</li>
<li>Q: How can I backup and restore my parameter sets?</li>
<li>A: You can backup and restore your parameter sets by using the "Export" and "Import" functions in the "File" menu. You can export your parameter sets to a file on your computer or a removable device, such as a USB stick or a CD-ROM. You can then import your parameter sets from the file to Drivemonitor or to another drive.</li>
<li>Q: How can I troubleshoot communication errors between Drivemonitor and my drives?</li>
<li>A: You can troubleshoot communication errors between Drivemonitor and your drives by checking the following things:</li>
<ul>
<li>Make sure that your cables and adapters are connected properly and securely.</li>
<li>Make sure that your drives are powered on and ready for communication.</li>
<li>Make sure that you have selected the correct communication mode and interface in Drivemonitor.</li>
<li>Make sure that you have configured the correct baud rate, parity, stop bits, and address for your drives.</li>
<li>Make sure that there is no interference or noise in the communication line.</li>
</ul>
<li>Q: How can I get more information about Drivemonitor and its functions?</li>
<li>A: You can get more information about Drivemonitor and its functions by accessing the user manual, which is available in PDF format on the Siemens website or on the installation CD-ROM. You can also access the online help system in Drivemonitor by pressing F1 or clicking on the "?" icon.</li>
</ul></p> 44f88ac181
Comments